Replacement Auto Window Tips
Reader’s Question:
I’m usually a do-it-yourself kind of a person. I need to replace my auto window and of course, I want to do it on my own. Do you have any suggestions for me on how to do that?
Bernard
San Jose, CA
If you were able to find a replacement auto window, you can then start the procedure. You need to be certain also that you have the proper materials for it. Normally, you would need some hand tools, repair manual and vacuum.
First, you have to carefully detach the door panel of the vehicle and if you see a plastic sheet beneath it, you could gradually peel it. Most likely, you will find the glass pieces that were from the old vehicle window. Take them off carefully with the use of gloves and the vacuum cleaner.
After that, you need to install the replacement auto window in the two-inch wide gap to be found on the door panel’s top. That is somewhat difficult since installing the glass could need some unscrewing in order to give more room for the glass installation. At this point, the repair manuals would very helpful. It would show as well the position of the clips and bracket which are stuck with the glass. Be certain also that the glass is even out once the weather-stripping and crews have been replaced. Next is that you have to put back the door panel and even it out to the window crank lever then try your newly-installed auto window.
Repairs done all by yourself could show to be a difficult chore. This is the reason why repair manuals as well as a little amount of knowledge could be so helpful in small repair chores like replacing the window of your vehicle.